Clamping System: Two-plate axes mold locking clamping system, with linear track
Extruding System: Frequency controlled AC motor
Hydraulic System: Yuken hydraulic valve/oil pump + proportional control
Electrical System: PEXROTH proportional servo valve + energy accumulator + hard tubes + GEFRAN position transducer
Control System:B&R 2003 Controller(Austria) with color monitor and 100 point Wall Thickness Controller
Main Technical Parameter
|
Name |
Units |
70D |
90D |
|
Max. product volume |
L |
6 |
12 |
|
Output(Dry cycle) |
PC/H |
600x2 |
550x2 |
|
Screw diameter |
MM |
70 |
90 |
|
Screw L/D ratio |
L/D |
22 |
22 |
|
Screw drive power |
KW |
18.5 |
45 |
|
Screw heating capacity |
KW |
12 |
20 |
|
Plasticizing capacity |
KG/H |
70 |
120 |
|
Oil pump drive power |
KW |
11 |
18.5 |
|
Clamping force |
KN |
90 |
150 |
|
platen size(WxH) |
MM |
370x450 |
550x550 |
|
Platen Moving Stroke |
MM |
440 |
660 |
|
Platen opening stroke |
MM |
180-530 |
220-660 |
|
Max. die diameter |
MM |
150 |
220 |
|
Central distance of bi-die |
MM |
150 |
240 |
|
Central distance of three-die |
MM |
80 |
90 |
|
Central distance of four-die |
MM |
60 |
90 |
|
Central distance of six-die |
MM |
60 |
80 |
|
Blowing pressure |
MPA |
0.6 |
0.6 |
|
Air consumption |
M3/H |
56 |
72 |
|
Cooling water pressure |
MPA |
0.3 |
0.3 |
|
Water consumption |
L/MIN |
90 |
100 |
|
Machine dimension(LxWxH) |
M |
3.6x2.6x2.5 |
4.5x3.0x2.7 |
|
Weight of machine |
TON |
10.5 |
16.5 |
